| All parts are guaranteed to be in satisfactory working order at the time of purchase. Every part purchased through our online store includes a 5-year unlimited mileage limited parts only warranty, provided you were the original purchaser of the part and you still own the vehicle on which it was installed. This warranty cannot be transferred to anyone at any time. |
Parts installed on commercial use vehicles are warranted for 90 days from the date of purchase.
|
What are the Warranty Terms?
|
| If any part should fail within the 5-year warranty period due to defect in material, we will, at our option replace the part or refund your money. You will be responsible to return the part with the original invoice to us properly packed and secured for shipping. Once we receive the part we will check it for our original markings, and proceed with approval of your warranty claim. |
What is NOT Covered?
|
- Improper installation of the part
- Failure due to accident or collision
- Vehicle is found under manufacturer’s recall
- Abuse, misuse, vehicle modification or vehicle is used off-road or for racing purposes
- Part is installed in vehicle other than the manufacturer designed the part for
- The installer failed to clear computer codes
- Failure due to fire, theft, vandalism, acts of terror, explosion, lightning, earthquake, hurricane, water damage, freezing or any other environmental conditions
- Vehicle was operated for prolonged period of time after the part’s failure
|
| |
Are there any Part Specific Limitations?
|
| Please read the detailed part description for specific part limitations. |
Do I have to follow any Installation or Maintenance Procedures?
|
| Prior to installation of your recycled used auto part, we suggest and require that you perform the following pre-installation maintenance. By performing the pre-installation maintenance you will prolong the life of your recycled part and protect its warranty. Below you will find the required guidelines as they apply to certain parts. |
| Front and Rear Axle Assembly |
Transfer Cases |
- Replace seals and cover gasket (where applicable)
- Fill to the proper level using proper fluids in accordance with vehicle manufacturer’s guidelines.
- All tires on the vehicle must be the same size as recommended by manufacturer for the vehicle.
|
- Replace seals and cover gasket (where applicable)
- Fill to the proper level using proper fluids in accordance with vehicle manufacturer’s guidelines.
- All tires on the vehicle must be the same size as recommended by manufacturer for the vehicle.
|
| Engine |
- Replace engine oil to manufacturers suggested levels
- Replace oil filter
- Replace gaskets (valve cover, oil pan & rear main seal)
- Inspect and replace (if needed) new timing belt
- Replace thermostat and water pump
- Flush cooling system and refill with antifreeze to appropriate level
- Install new spark plugs, new belts and hoses
- Change the oil after the first 600 miles and at recommended service intervals thereafter
- Service the vehicle at proper intervals as per manufacturer's guidelines
|
| Transmission |
- Check the flexplate for cracks or excessive wear on the starter teeth.
- Replace oil pan gasket, front and axle seals and replace filter (if applicable).
- Flush & inspect transmission cooling lines. Follow manufacturer's recommendations.
- Properly align torque converter (Automatic Transmission Only).
- Finish installation of the transmission. When finished, add transmission fluid to manufacturer's specifications. Start the engine and add more TF immediately. Additional fluid can now be added until the transmission reads ‘full’ on the dipstick.
- Reset control module codes.
- Adjust throttle position sensor cable.
|
|